PCH series ring hammer crusher

PCH series ring hammer crusher structure diagram

PCH series ring hammer crusher main technical parameters

model	Rotor × Diameter length /mm	Rotor speed r/min	Maximum feed block size /mm	Discharging particle size /mm	Production capacity/T · H1	motor		Appearance of size(length x width x height) /mm
						model	Power/kw
PCH-0402	400×200	960	200	≤30	8～12	Y132M2-6	5.5	810×890×560
PCH-0404	400×400	970			16～25	Y160L-6	11	980×890×570
PCH-0604	600×400	970			22～23	Y180L-6	15	1050×1270×800
PCH-0606	600×600	980			30～60	Y225M-6	30	1350×1270×820
PCH-0808	800×800	740	300		75～105	Y280M-8	45	1750×1620×1080
PCH-1010	1000×1000				160～200	Y315M2-8	90	2100×2000×1340
					200～245	Y315M3-8	110
PCH-1016	1000×1600				300～350	JS128-8	155	3700×2000×1350
					400～500	Y400-8	220
PCH-1216	1200×1600	740	350		500～620	Y400-8	280	3100×2800×1750
					620～800	Y450-8	355

Note: 1. Discharge particle size can be arbitrarily selected within 3 ~ 60mm. When the discharging particle size is not greater than 15mm, the production capacity should be 60% of the value listed in the table; When the discharging particle size is 3mm and the material surface moisture is not more than 10%, the production capacity should be 30% of the value listed in the table. 2. When ordering, it is necessary to indicate the name of the broken material and the discharging size, the required equipment model and installation form (left or right mounted), the motor power and voltage, whether the hopper or bypass groove is needed.